Sliding Patio Doors Repair
Patio doors that slide open are ideal for enjoying your outdoor space, but they can become difficult to open or close. This can be due to a number of issues, such as dirty tracks or rollers that are not aligned properly.
Clean the track first and Lubricating the rollers. You can also adjust the rollers using the adjustment holes on the bottom of the movable door panel.
Tracks that are damaged or dirty
A sliding door that doesn't slide properly can be caused by a dirty or damaged track. Over time, dirt, grit and even rust can accumulate and stop the track from moving smoothly. A mild detergent and a brush will do the trick. This job should be done regularly to ensure a smooth operation and prevent expensive repairs in the future.
A door that is leaking can be a common issue. It requires immediate attention in order to stop structural damage, water damage and mold growth. Most often, the issue is due to worn weather stripping and misaligned doors, which can be fixed by replacing the weather stripping and aligning the door.
Rollers that bounce off the track are another common issue that can be fixed with some simple DIY work. This task can be difficult so you may need a helper to assist you. To reposition the rollers to the right position, sit inside the house and lean one of the panels towards you. To prevent the panel from falling, put it on sawhorses when it's been removed from the bottom track. Then, loosen the screws that hold each roller in place and remove them using the help of a screwdriver. You can now remove any dirt that has accumulated between the wheel and the tracks. Then, clean each wheel with denatured alcohol on a rug. Reposition the wheels back to their tracks and attach them once more.
It is possible to straighten bent track sections using a mallet made of rubber and a piece of wood. If the bent section is near hinges or has the potential to cause more damage, it's recommended to seek out a professional.
Misaligned Rollers
If your sliding door isn't sliding as smoothly it's most likely due to the roller wheels are misaligned with the track. The wheels could be dirty, rusted or their bearings have worn out. This creates friction between the floor of the door and the track, causing it to snag or grind when it's shut or opened. It can also cause sounds that squeak.
This is a straightforward fix. The wheels are on the bracket, which can be adjusted, which means you don't have to remove the door. Find the holes for adjustment (usually on the opposite side of the frame) and make use of a screwdriver to turn the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise rotation lowers it. Continue to adjust until the door moves smoothly and quietly when it is open or closed.
It is essential to adjust the wheel before making adjustments to your latch. In order for the lock to function properly, the latch hooks must be aligned with the strike plate. If you don't, the latch could open or close when you're out of the room.
A sliding patio door is an investment. Making sure they are in good working order will ensure your family's safety. You can avoid future expensive repairs by addressing the most common issues, such as broken rollers, tracks and handles. If you need help with your patio doors, contact our team. We will assess your needs for repair of your sliding patio door and assist you in keeping it in top condition. Our professionals can also help with any replacement parts you may need.
The door frame is loose or damaged
Sliding patio doors are a great addition to any home and offer a stylish and practical alternative to hinged or swing-open doors for patios. Like any other type of hardware doors, they can experience many issues over time. Many of these issues can be fixed with a little DIY expertise.
A common issue that affects sliding patio doors is a gap in the frame. This can be caused by a variety of factors, including an improperly aligned track or rollers, a damaged track or door, or a bowed door frame. In most cases, the cause of this issue is easily remedied by removing the door and re-attaching the track or rolling elements. This should be done with extreme care so as not to harm the track or frame.
In certain situations, it could be required for the entire track to be replaced. This can be done easily with a universal kit, which is available in most major hardware stores. These kits are simple to install and will have your door operating correctly in no time.
Regularly inspect your sliding door's hardware and frame for signs of wear, like loose bolts or screws. This is a simple and effective DIY patio maintenance task that can be done with the help of a screwdriver. In addition, it is essential to oil your rollers and tracks to make sure they operate smoothly and prevent premature wear.
For many homeowners the patio doors are the primary entry point to their backyard as well as outdoor living space. As such, they need to be able to function correctly to ensure the safety of their home and provide security. By following these simple DIY maintenance tips, homeowners can extend the life of their patio door and cut down on costly repairs or replacements.
Handle is not working properly
The sliding patio doors are ideal for allowing you to get into your home and get access to your backyard, but they can become difficult to operate when they are misaligned. A defective handle can cause the door not to shut or open properly. Repairing a damaged handle can be accomplished at home.
In many cases, a loose grip is the result of screws that have slipped out of the backplate. To remedy this problem, simply tighten the two screws on the inside of the handle using the help of a screwdriver. If you find that the handle remains loose, it could be an indication that the threads have damaged and must be replaced.
Alternatively, a broken latch might be the culprit. This is more likely happen if the latch is made of plastic instead of metal. If the latch is not turning or catching you can try oiling it first to see if it aids. If this does not work, you may need to replace the lock.
If the handle is cracked or broken, it could be difficult to operate. If this happens, you will need to replace the handle with one that is in line with the style and design of your patio doors.
Feldco can help restore your patio doors to their former glory, whether they are brand new or old and outdated. We have a variety of high-quality patio doors in various sizes and styles. For more information about our products, call us today! We are proud to serve homeowners in Southern California, including Ventura County, Orange County & San Diego County.
Poor weatherstripping
It's time to replace your weather stripping if see light around closed windows and doors or notice a draft pushing towards the door or window. patio door repairs near me RepairMyWindowsAndDoors form a tight seal that blocks unwanted air, pests, or water from getting inside your home. It also keeps your conditioned and heated air inside, thereby saving money on energy bills year-round.
It may have lost its positive seal's bouncy and bouncy due to age. This is easy to diagnose by taking a dollar bill and putting it through the seal between the top of the door frame and bottom of the door jamb where the two meet. If the dollar bill slides between the seal and door easily then it's time to replace the weatherstripping.
It's tempting to cut off only the worn portion of weather stripping to replace it, but this could cause cracks on both sides of the new piece and may cause problems with the seal in the future. It is more efficient to replace all the stripping. This will let you rest sure that your door will be sealed properly.
For a simple DIY project follow our weather stripping project guide to take off the old weather stripping. Then, you can apply the right material to your sliding patio door and frame to ensure a long-lasting solid, secure seal. It's a great way to fix your door and reduce your energy bill, so don't wait until it's too late. Your wallet and home will be thankful.